If you plan on refinishing your own shuffleboard, you should start by sanding the entire table down.
Next, apply several coats of sealant (usually one or two coats of polyurethane). After letting the surface dry, you should sand the table with fine grit sandpaper and then apply another coat of polyurethane. After letting the surface dry again, sand the surface with medium grit sandpaper. Let the surface dry and apply a final coat of polyurethane.
Therefore, to learn with setp by step guide for resurfacing the table, you can scroll down to know more about how you refinish shuffleboard properly!
How do You Refinish a Shuffleboard
There are several factors to take into consideration when you’re trying to decide whether refinishing is right for you or not.
You first need to figure out, “How did my shuffleboard become a problem in the first place?”. Did you lose it?
Here is how to refinish or resurface the shuffleboard.
Step 1: Choose a Surface
Step 2: Cut the Wood
Step 3: Apply Epoxy to the Board
Step 4: Sand and Polish the Resurfaced Game
Step 1) Choose a Surface
If you have old shuffleboard that needs some attention, the first step is to choose a surface to refinish it. The most common options are polyurethane, wax, or a combination.
Once you’ve decided on a surface, clean the board thoroughly before starting. Any dirt or debris will get in the way of a smooth finish. If there are deep scratches or gouges in the wood, you may need to use a wood filler before refinishing.
Once the board is clean and dry, start by applying a coat of polyurethane (or wax). Be sure to follow the manufacturer’s instructions for application and drying time. Once the polyurethane (or wax) has dried, apply another coat.
Also learn | Can I Use Car Wax on my Shuffleboard Table
Step 2) Cut the Wood
The first step in maintaining your shuffleboard is to cut the wood. This will ensure that the board is level and smooth. Use a straight edge and a sharp blade to make the necessary cuts.
Be sure to sand down rough edges before moving on to the next step.
Step 3) Apply Epoxy to the Board
After doing the above step, the next step is to apply epoxy to the board. This will help protect it from damage and make it look new again. Make sure to read the instructions on the epoxy carefully, as each type may be a little different.
Once you have applied the epoxy, let it dry completely. Depending on the epoxy you are using, this can take anywhere from 12 to 24 hours. Once it is dry, you can start playing with your new-looking shuffleboard!
Step 4) Sand and Polish the Resurfaced Game
The last step to refinishing the shuffleboard game is to sand down the surface of the table. You can use a power sander or do it by hand. Be sure to get all of the old paint and finish off the surface. Then, apply a coat of primer.
Once the primer has dried, paint the table with your desired color. Make sure to apply at least two coats for good coverage. Let the paint dry completely before moving on to the next step.
To polish the table, you’ll need some automotive rubbing compound and a polishing pad for your drill.
And now your shuffleboard has been refinished if you follow the above steps!
Shuffleboard tables are a popular game room addition but can also be expensive. If you already have a shuffleboard table and it starts to show wear and tear, there’s no need to buy a new one – you can refinish it yourself!
What Paint do you Use for the Shuffleboard?
I use dark brown. You can get it at any hardware store. If you want a light color, then use blue. You can also use the FIXALL skid grip anti-slip paint to refinishing the table.
How to Refinish an Indoor Wood Shuffleboard Table
Refinishing an indoor wood shuffleboard table is a process that anyone with basic knowledge of woodworking can complete.
There are a few things to consider before starting, such as the type of wood the table is made from and the table’s condition.
- The first step is removing all the old finishes from the table. This can be done using a chemical stripper or sanding.
- After the old finish has been removed, the table should sand down to remove any scratches or blemishes.
- Once the sanding is complete, a new finish can be applied. You can use any types of finishes that are available on the market, that will suit the type of wood used for the table and the desired look.
4 Tips for Protecting the Finish on Shuffleboard Tables
There are many ways you can protect the finish on your shuffleboard table.
Tip 1. Shuffleboard Table Covers
You can purchase a durable cover that protects the table from scratches. One of the advantages of having a protective cover is that it will keep dust off the table. This helps your board to stay cleaner and helps to prevent the surface from getting dirty.
The covers should be made from vinyl and are usually white. You can purchase a cheap or quality cover depending on how important the surface protection is to you.
Tip 2. Wood blocks
You can protect the shuffleboard table by placing wood blocks underneath it. If you have wooden floors, you can put a few wood blocks on top of the table, which will protect it from scratches. Wood can get scratched by people and by playing on the board, but it will protect the surface.
A simple wooden block will provide excellent protection for your shuffleboard table. Make sure that the wood block size is sufficient enough to not be too small. A large wood block will protect the table better than a small wood block.
Tip 3. Wood flooring
Another option is to replace the surface of your shuffleboard table with wood flooring. This will allow you to enjoy the game of shuffleboard without having to worry about scratching the surface of your table.
The advantage of using wood as the surface for your table is that it will allow you to place a lot of weight on it while you are playing.
However, if you have a wooden floor, you can simply replace it with wood flooring. Make sure that the quality of the wood flooring is high enough to provide excellent protection to the surface of the table.
Tip 4. Wood Chips
You can place wood chips under the surface of your shuffleboard table. This will help to protect the surface from dirt and grime. There is a disadvantage to this technique. You can put a lot of weight on the surface of the board.
Because you cannot put the chips in the middle of the board, you need to make sure that the center of the board is padded.
You can find wood chips in different sizes, and they are often used to protect and cushion other surfaces, such as your furniture or kitchen counters. You may find that using wood chips will protect the surface of your shuffleboard table well.
How often do I Need to Refinish my Shuffleboard Tables?
Some people enjoy playing with others at public clubs and private rinks. Others prefer private home play, and some just enjoy a few rounds with friends and family. Whatever the reason, people like to shuffleboard.
But like many board games and sports, shuffleboard needs a little TLC to keep in top condition. The wooden boards must be maintained. Players must be careful to avoid scratches and nicks. While the professionals also provide the refinishing service and high-end finishes you’d expect from a pro shop.
Professional refinishing services will sand and stain shuffleboard tables to get the look and feel that new wood always provides. Sanding removes any loose surface dirt, dust, and grime from the wood.
Then a sealer and topcoat will create a durable, protective finish. However, the design finishes to last as long as the table itself and resists wear from humidity, moisture, and sunlight.
If the refinishing job is properly executed, the table will have a look of like-new quality.
For the highest-quality results, it’s recommended that you hire a professional refinisher who knows how to get the best out of a piece of wood. Therefore you can also take the Shuffleboard professional repair refinishing services for shuffleboard and pool table tables.
FAQS
What kind of finish do you put on a shuffleboard table?
We recommend you give it a good sanding down, then apply two coats of clear varnish, one coat of sealer and then finish with three coats of topcoats.
How much does it cost to resurface the shuffleboard?
Resurfacing shuffleboard generally costs $100 or more. Most people assume that the cost is very high because it’s a high-quality surface. However, a cheaper, plastic-coated surface will cost less than $20. But you still get the quality shuffleboard experience.
How do you resurface your outdoor shuffleboard?
Just take a large piece of tarp or plastic and lay it over the surface of the outdoor shuffleboard. This will keep the oil from running off the wood and make the surface slick again.
Conclusion
Shuffleboard Resurfacing is an easy thing to learn and an incredibly satisfying hobby. If you haven’t tried it yet, I encourage you to give it a try. It’s not difficult to learn, and the satisfaction is unmatched. I hope that you enjoyed this guide.
Thanks for reading!
